Keying in the service settings manually
1. Press
Menu
, select
Services
, and
Settings
.
2. Select
Active service settings
.
You need to activate the set where you want to save the service settings. A set is a collection of
settings needed for making a connection to a WAP service.
3. Scroll to the set you would like to activate and press
Activate
.
4. Select
Edit active service settings
.
5. Select each of the service settings one by one and key in all the required settings.
•
Settings name
- Key in the new name for the settings set and press
OK
.
•
Homepage
- Key in the homepage address of the WAP service that you want to use, press
for a period, and press
OK
.
•
Session mode
- Select
Permanent
or
Temporary
.
•
Connection security
- Select
On
or
Off
.
When the connection security is
On
, the phone tries to use a secure connection with the WAP
service. If a secure connection is not available, the connection will not be made. If you wish to
connect anyway, with a non-secure connection, you must set the connection security to
Off
.
•
Data bearer
- Select
GSM data
or
GPRS
. For pricing, connection speed and other information,
contact your network operator or service provider.
The following options depend on the selected data bearer:
When
GSM data
is the selected data bearer:
•
Dial-up number
- Key in the phone number and press
OK
.
©2001 Nokia Corporation. All rights reserved.
Me
n
u
fu
ncti
o
n
s
84
•
IP address
- Key in the address, press
for a period, and press
OK
. You obtain the IP address
from your network operator or service provider.
•
Authentication type
- Select
Secure
or
Normal
.
•
Data call type
- Select
Analogue
or
ISDN
.
•
Data call speed
- Select the speed you want to use, or select
Automatic
.
Automatic
is available
only if the current selected data call type is
Analogue
. The actual data call speed depends on the
service provider.
•
Login type
- Select
Manual
or
Automatic
. If you select
Automatic
, the login type uses the user
name and password keyed in the following settings. If you select
Manual
, the login information
is required when establishing a connection.
•
User name
- Key in the user name and press
OK
.
•
Password
- Key in the password and press
OK
.
When
GPRS
is the selected data bearer:
•
GPRS connection
- Select
Always online
or
When needed
.
If you select
Always online
, the GPRS connection is automatically established when you switch
on the phone. The
indicator is shown on the display in standby mode. The GPRS connection is
not closed when you end a WAP connection.
If you select
When needed
, the GPRS connection is established when you connect to a WAP
service and closed when you end the WAP connection.
•
GPRS access point
- Key in the access point name and press
OK
.
An access point name is needed to establish a connection to a GPRS network. You obtain the
access point name from your network operator or service provider.
©2001 Nokia Corporation. All rights reserved.
Me
n
u
fu
ncti
o
n
s
85
Me
n
u
fu
ncti
o
n
s
•
IP address
- Key in the address, press
for a period, and press
OK
. You obtain the IP address
from your network operator or service provider.
•
Authentication type
- Select
Secure
or
Normal
.
•
Login type
- Select
Manual
or
Automatic
. If you select
Manual
when the
GPRS connection
is set
to
Always online
, the
Always online
connection will be disabled.
•
User name
- Key in the user name and press
OK
.
•
Password
- Key in the password and press
OK
.